1Department of Electronics & Communication Engineering, Hirasugar Institute of Technology, Nidasoshi, Karnataka, India
2Department of Electronics & Communication Engineering, K. L. E’s Dr. MSS CET, Belagavi, Karnataka, India
3Department of Electronics & Communication Engineering, K. L. E’s Dr. MSS CET, Belagavi, Karnataka, India
Corresponding author email: sskamate.ece@hsit.ac.in
Article Publishing History
Received: 10/10/2020
Accepted After Revision: 30/03/2020
equivalent digital code, must be designed efficiently. This paper presents design of 3-bit high speed and power efficient Flash Analog to Digital Converter. Flash type Analog to Digital Converter is designed and implemented with different inverter based comparators and based ROM encoder. A high speed ROM encoder is designed to convert thermometer code to its equivalent binary code. The proposed research compares various inverter based comparators such as Threshold Inverter, Quantizer comparator, Single Inverter Comparator, Single Inverter Comparator with the reference voltage and LTE comparators, designed using cadence design tools with 180nm technological library. The simulation results show that Single Inverter Comparator consumes less power 5.647uW among TIQ and R-TIQ comparators. Single Inverter comparator with reference voltage consumes less power however with more delay. Here Flash ADCs are designed with various inverter based comparators and ROM encoder. The results show that TIQ comparator based ADCs consume power of 298.9uW, whereas ADC designed with Single Inverter Comparator consumes 459.8uW power.
Itiq Comparator, Rom Encoder, Single Inverter Comparator, Tiq Comparator.
